Cleaning The Milk Pipework Manually Or Using The Maintenance Programme - Miele CM 7550 CoffeePassion Operating Instructions Manual

Cleaning the milk pipework
manually or using the
maintenance programme

Risk to health due to inadequate
cleaning
Milk naturally contains bacteria. Heat
and moisture inside the coffee
machine can cause these bacteria to
multiply, e.g. milk residues can go off
and pose a risk to health.
Clean all components in which milk
is transported on a regular basis.
The milk pipework must be cleaned at
least once a week. A message in the
display will prompt you when this needs
to be done.
 Confirm with OK.
When you confirm the message
the milk pipework with OK, the internal
counter for the cleaning interval will be
reset. You will not be reminded again.
There are two options for cleaning the
milk pipework:
- You can remove and dismantle the
central spout with its integrated
Cappuccinatore and either wash it in
the dishwasher or by hand with warm
water and a little washing-up liquid
(see "Cleaning the central spout with
integrated Cappuccinatore").
- Or you can clean the milk pipework
using the Clean the milk pipework
maintenance programme together
with the cleaning agent for milk
pipework (see "Cleaning the milk
pipework").
If you have released the connecting
piece from the milk pipework: when
reassembling, ensure that the smaller,
thinner end of the connecting piece is
pushed into the hose.
Tip: In addition to your weekly cleaning
routine we recommend carrying out the
alternative cleaning procedure once a
Clean
month. For example if you manually
clean the machine once a week, then
you should run the maintenance
programme once a month. This
combination will ensure optimum
cleaning of the milk pipework.
Cleaning and care
69