Cleaning Clogged Milk Pipework - Miele 09 741 510 Operating And Installation Instructions

Cleaning clogged milk pipework

If the quality of the milk froth is
unsatisfactory, the air intake hose may
be clogged. Follow the instructions in
"Step 2: Clean air intake hose and
angled section in the door".
If no milk comes out of the main
dispenser, only steam, please follow
the instructions in Step 1 through 4.
First check if the milk in the milk
container has spoiled. This can clog
the milk lines.
To clean the clogged milk lines, take a
step-by-step approach. Afterwards,
check if the milk and/or milk froth
preparation and quality are satisfactory.
If the milk and/or milk froth preparation
and quality are still not satisfactory,
repeat all the steps described without
preparing beverages in between.
68
Step 1: Cleaning the milk
pipework in the milk container
lid
^ Pull the milk intake pipe a out of the
milk container lid.
Make sure you also remove the
gasket b.
^ Clean both under running water.
Insert the supplied cleaning brush
into the stainless steel pipe and move
it back and forth until all milk residue
has been removed.
^ Use the cleaning brush to clean the
milk pipework in the lid as well.