Printable Area - Epson PP-100AP User Manual

Printable area

Printable area is the area for the label printing.
The printable area can be set from Set Inner/Outer Diameter screen of the EPSON Total
Disc Maker.
In the Set Inner/Outer Diameter screen, you can select Standard, Wide, or set manually.
Following diagram shows the printable area for Standard and Wide. Printing will be done in
the gray area.
CD/DVD:
12-cm (4.72") CD/DVD (Standard)
Inner diameter
45 mm (1.77")
Caution:
c
❏ Make sure to set the inner diameter and the outer diameter within the areas shown above.
Printing on sections outside the printable area may damage your CD/DVD drive.
❏ The EPSON Total Disc Maker can set between inner diameter of 18 mm to outer diameter
of 119.4 mm (0.71 to 4.70"). However, printing outside printable area (45 to 116 mm) may
result in sticking, staining of disc tray, peeling of print, and blurring of print. It is
recommended to check the disc type before using.
❏ When printing outside printable area (ink absorbing layer) of the disc is being used, ink
printed outside the printable area does not fix. Check the label of the printable area of the
disc being used before setting.
❏ Precautions for setting the printable area
-Make sure that the printable area set does not exceed the printable area of the actual
disc being used.
-Check whether coloration of print made on the rib (stack ring) is not uniform.
-Printing on the rib (stack ring) may cause ink sticking, disc sticking, and ink erasure after
printing.
45 mm
116 mm
Outer diameter
116 mm (4.57")
12-cm (4.72") CD/DVD (Wide)
25.5 mm
116 mm
Inner diameter Outer diameter
25.5 mm (1.00") 116 mm (4.57")
99
Product Information