Epson PP-100AP User Manual page 21

Standard Mode
This mode uses Stacker 1 as the input source, and Stacker 2 or 4 as the output source.
When Stacker 2 is selected as the output source, up to 50 CDs/DVDs can be created at
once. Also, if you refill discs to the input stacker and take out published discs from the
output stacker at the same time, up to 1000 CDs/DVDs can be published in a single job.
If Stacker 4 is selected as output source, discs can be removed without stopping the
product while running a job.
Note:
This mode does not use Stacker 3.
& See "Standard Mode" on page 24.
External Output Mode
This mode uses Stacker 1 and 2 as the input sources, and Stacker 4 as the output source.
Different types of discs (CD and DVD) can be loaded into each of the 2 stackers and can
create different types of discs. This is ideal for creating small batches of discs at once.
If a same type of discs are loaded into Stacker 1 and 2, up to 1000 CDs/DVDs can be
continuously published in a single job by refilling discs and taking out published discs.
Since discs are ejected to Stacker 4, discs can be removed without stopping the product
while running a job.
Note:
This mode does not use Stacker 3.
& See "External Output Mode" on page 33.
Batch Mode
This mode uses Stacker 1 and 2 as the input sources, and Stacker 2 and 3 as the output
sources.
You can create up to 100 CDs/DVDs at once without refilling and taking out discs while
publishing. Up to 1000 CDs/DVDs can be continuously published in a single job by refilling
discs and taking out published discs. To use this mode, you need to place Stacker 3 into
the product.
& See "Batch Mode" on page 43.
21
Publishing Discs