Start Playback - JVC AX-THL1 Instructions Manual

Operations for USB MEMORY
Basic playback for USB MEMORY
7 To play a file in a USB mass storage class
device
1
Connect a USB mass
storage class device (see page 13)
while the system is turned off.
2
Turn on the system. (see page 16)
3
Select "USB MEMORY" as the
source. (see page 16)
4

Start playback.

On the remote control:
Press USB MEMORY 6.
On the center unit:
Press iPod/USB MEMORY
CONTROL ‹/8.
The operations of the files in a USB mass storage class
device depend on the file types stored in the device.
For MP3/WMA/WAV files
The file control display (see page 24) appears on the
TV screen.
For JPEG files
Each file (still pictures) is shown on the TV screen for
about 3 seconds (slide-show). When stop the playback,
the file control display (see page 24) appears on the TV
screen.
For MPEG-1/MPEG-2/ASF files
Pressing TOP MENU or MENU shows the file control
display (see page 24) on the TV screen during
playback.
NOTE
• When several types of files are recorded on a device, select file
type you want to play on the setup menu. (see page 30)
7 To stop
Press 7.
7 To pause
On the remote control:
Press USB MEMORY 6 during
playback.
On the center unit:
Press iPod/USB MEMORY CONTROL
‹/8 during playback.
To continue playback, press the button again.
22
See page 21 for button locations.
7 Playback information on the display window
MP3/WMA/WAV/MPEG-1/MPEG-2/ASF file
Example: When an MP3 file is played back
Signal and speaker indicators (see page 28)
Group number
Elapsed playing time (hour:minute:second)
* Each time you press DISPLAY, the elapsed playing time
and the file information appears alternately.
JPEG file
Group number
NOTE
• You can also check the playback information using the on-
screen bar. (See page 24.)
• When playback is stopped, the file type is shown on the
display window instead of elapsed playing time.
7 Screen saver
An image may burn in on a TV screen if a static picture is
displayed for a long time. To prevent this, the system
automatically dims the screen if a static picture is displayed
for over 5 minutes (the screen saver function).
• Pressing any button will cancel the screen saver function.
• If you do not want to use the screen saver function, see
page 29.
File number
(during playback only)*
File number
File type