Function Item List Of Service Utility - Panasonic KV-S3065CL SERIES Service Manual

9.2.

Function item list of Service Utility

Service Utility item list is as follows.
Note:
When two or more scanners are connected to PC, execute "Select Scanner" to define the scanner before evaluating.
The procedure is as follows.
1. Click "Select Scanner" on the Main Menu.
2. Select the product number and interface of the scanner to evaluate.
Item
Scanner Status
Scanner information
Scanner Counter Update All Counter
Clear Counter for
cleaning roller
Clear Counter for
replacing roller
Scanner Condition Sleep Mode
Clean Imprinter
Paper Mode / Buzzer
Setting
Compatible Mode
User Shading
Warning Setting
Set Default
Test LED
Key / Sensor
Sensor Sensitive Level To check sensitive level of each sensor (Waiting, Starting, Skew (R), Skew
Feed Motor
Conveyor Motor
Hopper Drive
Feed
Sleep Mode
CIS Level
CIS Focus
Double Feed
Memory
Adjust Shading
All Position
Individual Position
Double Feed
Other (USB ID, Save USB ID.
Information)
Save Information
*1
Note : This item is available only in case installing Imprinter (Option) to scanner KV-S3065CL/S3065CW Series.
Remarks
(1) Parameter setting by user
(2) Status indication
(3) Parameter setting by service person
(4) Adjustment
(5) Diag.
(6) Maintenance
To indicate scanner status (Ready or Error or Warning)
To indicate scanner information about Model, firmware version, Gate Array
version, board revision, additional memory size (status), and interface
condition
To update the values of System Counter, Cleaning roller Counter, and
Replacing roller Counter
To clear Counter for cleaning roller to zero after cleaning roller
To clear Counter for replacing roller to zero after replacing roller
To set this mode to be enabled or disabled, and to set waiting time before
entering to the sleep mode
*1
To clean an ink jet head of imprinter.
To set scanning size (A4 or Letter) when the Document Guide is in A4
position, and to set Buzzer ON/OFF condition.
To make this scanner operate as another scanner with this mode
To execute shading correction at the user side, or to restore the shading data
to the default (Factory-setting).
To set warning timing to clean roller and to replace roller
To set "sleep mode setting", "warning timing to clean and to replace
roller" to the default
To light LED on the front cover with colors changing periodically
(Green→Orange→Red→Green→Orange......)
To do Key or Sensor ON/OFF test.
(L), Ending (Front), Ending (Rear), Paper Jam)
To check Paper Feed Motor's Rotating
To check Conveyor Motor's Rotating
To check the hopper's Up/Down Mechanism
To check paper feed mechanism.
To check whether sleep mode function works properly
To check maximum peak level after setting gain
To check whether CIS focus point is appropriate to scan documents and to
adjust the focus, showing a CIS gray density level on the display.
To check the Double Feed Detector(R)'s level (Response level) after setting
the ultrasonic sending level and frequency of the Double Feed Detector(G)
To execute memory R/W test.
To execute shading correction
To adjust scanning length, vertical, and horizontal positions for front and back
sides, automatically
1. To execute automatic length, vertical, or horizontal position adjustment for
front and back sides, individually
2. To adjust scanning length, vertical, and horizontal positions for front and
back sides manually.
To correct the Double Feed detector's ultrasonic sending level and frequency
automatically or manually.
To change USB ID. for the scanner, connected to PC.
To save scanner and PC information.
81
Purpose
KV-S3065CLSERIES / KV-S3065CWSERIES
Remarks
(2)
(2)
(1), (6)
(1), (6)
(1), (6)
(1)
(1), (6)
(1)
(1), (3)
(4)
(3)
(3)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(4)
(4)
(4)
(4)
(3)
(1)