Monitoring Reference (Pr. 55, Pr. 56, Pr. 866) - Mitsubishi Electric FR-V500 Instruction Manual

Display functions 1 (Pr. 52 to Pr. 56)
REMARKS
Where to monitor the data set in Pr. 52 varies with the setting.
Factory setting
* The monitor displayed at powering on is the first monitor. To set the first monitor, press
Power-on monitor
(First monitor)
FR-DU04
-1 CONTROL PANEL
r/min
A
V
MON EXT PU
REV FWD
Output speed
monitor
1) Setting is any of "5 to 12" (Displayed in the third monitor position)
First monitor
Output speed monitor
2) Setting is any of "17, 18 and 24" (Displayed instead of output current monitor)
First monitor
SET
Output speed monitor
3) Setting is any of "19, 20, 23, 25" (Displayed instead of output voltage monitor)
First monitor
SET
Output speed monitor
Related parameters
• Speed monitoring reference setting ⇒ Pr. 55 (Refer to page 100.)
• Current monitoring reference setting ⇒ Pr. 56 (Refer to page 100.)
• Torque monitoring reference setting ⇒ Pr. 866 (Refer to page 100.)
• Output filter of terminal DA1 ⇒ Pr. 867 (Refer to page 183.)
3.7.2 Monitoring reference (Pr. 55, Pr. 56, Pr. 866
Set the value that is referenced when the output speed or output current is
selected for the DA1 and DA2 terminals and PU level meter display.
Parameter
55 Speed monitoring reference
56 Current monitoring reference
866 Torque monitoring reference
Second monitor
FR-DU04
-1 CONTROL PANEL
SET
MON EXT PU
REV FWD
1) Output current
monitor
2)
Second monitor
SET
Output current monitor
Second monitor
Setting "17, 18, 24" monitor
Second monitor
Output current monitor
Name
Third monitor
FR-DU04
-1 CONTROL PANEL
r/min
SET
A
V
MON EXT
REV
Output voltage
1)
monitor
1) 3)
Third monitor
SET
Setting "5 to 12" monitor
Third monitor
SET
Output voltage monitor
Third monitor
SET
Setting "19, 20, 23, 25" monitor
speed
Factory Setting
1500r/min
Rated inverter current
150%
100
for more than 1.5s.
SET
Alarm monitor
FR-DU04
With alarm
-1
r/min
SET
A
V
PU MON EXT
FWD REV
torque position )
10VDC (terminal DA1)
10VDC (terminal DA2)
Output
or
display
Setting Range
0 to 3600r/min
0 to 500A Extended mode
0 to 400%
CONTROL PANEL
r/min
A
V
PU
FWD
SET
Pr.55
Pr.56
Pr.866
Remarks