Feed Dog Height - JUKI HZL-27Z Service Manual

Service Manual

2. Feed dog height

〔Checking〕
1. Move the feed dog to its highest position by turning hand wheel. Confirm if the feed
dog height is 0.89-1.09 mm from needle plate.
〔Adjustment〕
1. Remove needle plate.
2. Turn the screw A to adjust the height.
Feed dog is too low. → Turn it clockwise
Feed dog is too high. → Turn it counter clockwise.
Original issue
May 2009
Page 7/24
Model
HZL-27Z
0.89～1.09 ｍｍ
Ａ