Service Manual
14. Bobbin case rotation stopper -1
1. Remove needle plate and take off bobbin case.
2. Check if the corner of square spring come to inside of shuttle frame (A) as illustrated
below.
3. Loosen screw (B) and move rotation stopper to arrow direction and tighten screw
(B) temporarily.
4. Insert the bobbin case to touch the lug to square spring as illustrated above.
5. Tighten the screw (B) securely.
Square
spring
Rotation topper
Square spring
o
Projecti
Original issue
May 2009
Page 21/24
Model
HZL-27Z
B