NEC Univerge SV8100 Features And Specifications Manual page 1559

UNIVERGE SV8100
The UC Desktop Application does not follow delay ringing. For example, if a virtual

extension is set to delay ring and appears on a Desktop terminal, the Desktop will show the
call as ringing immediately.
The Bluetooth Cordless Handset (BCH) is not a supported terminal when using 1st-Party

CTI, 3rd-Party CTI, or with the Desktop Suite.
A maximum of 128 Desktop Applications connections is supported (Desktop Client,

Desktop Client with Shared Services or SoftPhones). Any 1st-Party CTI over ethernet
connection takes away from the 128 maximum connections.
The SV8100 UC Desktop Suite Applications does not support Network Address Translation

(NAT). Because of this, any Desktop Application must appear to be on the same network
as the SV8100 VoIP Interface (IPLA/IPLB). For remote Desktop Applications, like SP310
soft phone, this can be achieved by a VPN connection to the network the SV8100 resides
on.
The UC Desktop Applications require a ADA-L Adapter installed on the multiline terminal

with connection directly to the client PC for Call Recording and Personal Greeting voice
functions when running in deskset mode.
With Version 1100 or lower software, the CD-CP00-US must be licensed for a IP Terminal

license for each Desktop Application whether it is running in deskset or softphone mode.
With Version 2000 or higher software, the CD-CP00-US must be licensed for either an IP

Terminal license or an IP Terminal Softphone License when using a SP310 Softphone or
the Enhancement Bundle.
UC Desktop Application users cannot dial digits while a call is in progress.

If the Desktop user presses the disconnect button to abort a transfer, the call shows up in

Desktop as a held call. The Desktop user is not automatically connected back to the caller.
When UC Desktop Application is in Toolbar mode, if the docked edge is changed from Top

to Bottom or Bottom to Top, it may rearrange the icons on the PC Desktop.
Recording with deskset mode, either digital multiline or IP multiline, requires ADA-L

adapter.
Recording with Softphone mode does not require an ADA adapter. Recording is done

through the softphone.
The Voice Mail button on the tool bar is not used in the US market.

If the dial window is open when a new call rings into the Desktop, and the phone is on-hook,

the new call takes priority and the dial window will close.
When using the Chat feature in the UC Desktop Applications, the maximum number of

characters in a chat message is 256.
The integration between the desktop application and the CD-CP00-US does not support

CAP keys 1000-9999. Only 0001-0999 can be supported. CAP keys above 1000 can be
used elsewhere in the system, but not for CTI controlled extensions which include Desktop
Suite.
SV8100 UC Desktop Suite Applications
Issue 12.0
2 - 1529