NEC Univerge SV8100 Features And Specifications Manual page 1351

UNIVERGE SV8100
Start Security Operation
1. Press Speaker and dial 719 + 1. The sensor is enabled using the timer in Program 20-55-01.
-OR-
2. Press function key (
20-55-01 expires. The sensor is valid.
-OR-
3. Security Sensor time pattern 1 starts.
Stop Security Operation
1. Press Speaker and dial 719 + 0.
-OR-
2. Press the red lit function key (
3. Security Sensor time pattern 1 stops.
When Detect Security Sensor is On
1. A Warning message sent to internal page group 1 and external page group 1.
2. An outgoing call is automatically sent according to setting in speed dial bin 1999.
3. When destination answers, VRS sends a second message.
4. Once received, extension 200 can be used for monitoring. To have a two-way conversation, dial
To Send Warning message
To send a Warning message, but not as an Emergency call:
Change Program 20-46-05 to no setting.
To Place an Emergency Call
To send an Emergency call, but not as an Warning message:
Set Programs 20-46-02 and 20-46-03 to 0.
Security
33), the function keys turn red. The key lights after the timer in Program

33), the function keys turn off.

Issue 12.0
.

2 - 1321