NEC Univerge SV8100 Features And Specifications Manual page 1534

Issue 12.0
Program
Program Name
Number
51-12-01 Primary System Information –
System ID
51-12-02 Primary System Information –
System Name
51-12-03 Primary System Information – IP
Address
51-12-04 Primary System Information –
MAC Address
51-12-05 Primary System Information –
Primary Priority Level
51-12-06 Primary System Information –
Main Software Version
51-13-01 NetLink Options– Automatic IP
Address List Operation Update
51-13-02 NetLink Options– Time Zone
Option
51-13-03 NetLink Options– MAC Address
Authorization Enable
51-14-01 NetLink System Control – Delete
System Information
51-15-01 Demonstration Setting
2 - 1504
Description/Comments
For reference only.
For reference only.
For reference only.
For reference only.
For reference only.
For reference only.
When set to 1, the list in Program
51-03-01 is automatically updated.
When set to 0, the following
features are affected: Clock
Display, Incoming/Outgoing
History List.
When set to 1, the following
features are affected: VRS Time
Announce, Date and Time Setting
Service Code, Alarm Clock
setting.
Refer to Program 51-02-04 for
setting MAC address.
Delete system information and the
slot information. The system must
be disconnected.
Automatically set the minimum
setting values in NetLink. A
system reset occurs after this
command is executed.

(This program is available
only via telephone
programming and not
through PC Programming).
UNIVERGE SV8100
Assigned Data
1
(default = 0)
(default not assigned)
(default =
000.000.000.000)
(default =
00:00:00:00:00:00)
(default = 0)
(default = XX.XX)
0 = Disable (Off)

1 = Enable (On)
(default = 1)
0 = Disable (Off)
1 = Enable (On)
(default = 0)
0 = Disable (Off)
1 = Enable (On)
(default = 0)
1~50
(default = 1)
1 = Primary automatic
setting
2 = Secondary 1 -
automatic operation
setting
3 = Secondary 2 -
automatic operation
setting
4 = Secondary 3 -
automatic operation
setting
SV8100 NetLink
Level
2 3









