Advertisement
To cancel
cleaning
process
before
Lock Indicator
Light comes
on
1.
Push the Door Lock switch.
2.
Turn Selector and Temperature Knobs from Clean to Off.
3.
Touch Start Time Pad twice, if a delayed clean was set.
TO stop cleaning
process
after Lock Indicator
Light comes
on
1.
Turn Selector Knobto Off, Note: The Lockfightwill go off butthe doorwill remain
locked until the oven has cooled down (about 45 minutes).
2.
Wait 45 minutes for oven to cool down, then turn Selector Knob to clean.
3.
Push Door Lock switch to unlock.
4.
Turn Selector and Temperature Knobs from Clean to Off.
'- When Selector Knob is turned to Clean, a fan comes on. If this fan is
notj
operating, the oven will goth roughthe self-cleaning processat a reducedoven I
temperature and the ovenwill not clean effectively. If the fan doesnot operate,
contact your Jenn-Air Authorized Service Contractor for service.
iMPORTANT
• To check Start Time befqre cleaning begins: Touch Start Time Pad. The start
time will be displayedbriefly,then Displaywill returnto time of day.
• To change Start Time before cleaning begins: See step 5 on page 24.
• To check Clean Time befor_eoleaning begins: Touch Cook Time Pad, The
wordsDELAY CLEAN will appear inthe Display. The cleantime willbe displayed
briefly,then Display wll[ returnto current time of day.
• To change Clean Time before cleaning begins: Touch Cook Time Pad, The
wordsDELAYCLEAN will appearin the Display, Touch • or • Pad untildesired
clean timeappears in the Display, Note: If • or • Pad is nottouchedwithin 5
secondsof touchingthe Cook Time Pad, the Cook Time Pad must be touched
again, indicator Word DELAY will remain in the Display until cleaning starts.
• To change Clean Time or Start Time aftgr cleaning begins: Cancel cleanin(
processas directed above. Followsteps 1-5, startingon pages 23 - 25,
26
Advertisement
