Bank Handling; Delete Page - TC Electronic System 6000 Basic Operation

BANK COPY - NAMING DISPLAY - DELETING PRESETS
Library - Bank
Via the Library Archive page you can copy Scene,
Routing and Engine banks to and from a 3.5" disk or a
PCMCIA card.
Basic Operation
Recalling/Storing to and from a 3.5" floppy or a PCMCIA
card is handled as a complete User bank transferal.
• Press Scene, Routing or Engine to select preset bank
type.
• Select "from" and "to" depending on your choice.
• Press Copy.
Scene/Routing/Engine Banks
To/From Bank
Banks can be Scene, Routing, Engine, or Card banks if
these are present on a PCMCIA card placed in the
Mainframe front panel.
To/From disk
File banks can be Scene, Routing or Engine Banks located
on a 3.5" disk present in the Mainframe.
Copy
Press to activate copy function between the selected
Banks.
Rename
Press to rename selected bank via the Naming display.
Clear
Press to clear the selected Bank. You will be asked to
confirm your choice to avoid unintended deletion.
Naming Presets
All user preset types - Scene, Routing or Engine level
can be renamed.
Basic operation
• Press the Name field. A keyboard will pop up.
• Type in the new name.
• Press Enter.
The preset is not stored when the keyboards Enter
key is pressed. Only the name is entered.
To store you MUST press the red Store key on the
Store page.
The previous accessed display will always be present
beneath the keyboard. Current Fader values will be
displayed and faders can be used to adjust parameter
values.
Library - Delete
It is possible to "clean up" the User bank by deleting
individual presets via the Delete page.
Deleting a Preset
• Press Delete (side tab) and select level by pressing
Scene, Routing or Engine.
• Select the preset to delete using the on-screen "Slider"
• Press the Delete key to delete the preset.
11