Store Operations - TC Electronic System 6000 Basic Operation

Operation Level Tabs
Function
Select
Tabs
Fader
Group
Selector
Library Store
- Scene, Routing or Engine presets
On the Store page the following banks are available for

store operations.

Scene
Allows you to store in the following bank.
• User (Preset #0-49)
Routing
Allows you to store in the following bank.
• User (Preset #0-49)
Engine 1-4
Allows you to store in the following bank.
• User (Preset #0-99)
Storing a Preset
• Press the Store tab and select Scene, Routing or
Engine 1-4.
• Use the "Slider" to select a preset location.
• Press the Store key to store the preset.
How to rename a Scene, Routing or Engine preset
• Press the Name field. A keyboard appears.
(See next page)
• Type in the new name.
• Press Enter.
The preset is not stored when the keyboard Enter
key is pressed. Only the name is entered.
To store you MUST press the red Store key.
10
LIBRARY - STORE
Wizard
• Press to enter the Wizard page.
Via the Mode and Type pages you can add preset tags to
user presets. When recalling presets using the Wizard;
these are the tags used.
For further instruction on the Wizard please read pages 8
and 9 of this chapter.
Library, Frame and Engine selectors
Fader assignments in the bottom of the display will
always reflect the last modified Engine. The Engine
Fader Group selector in the lower left corner
indicates the Engine in use.
Press to add
Wizard tags to
presets.
Parameter Fader
values present in
the last modified
Engine.