SECTION 13—WIRE ROUTING
SECTION 13—WIRE ROUTING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off
switch on the joystick is in the OFF position.
MKIV Wire Routing
NOTE: For this procedure, refer to FIGURE 13.1.
LEFT Motor
Lead
Tie-Wraps
Controller
Charger Cable
Charger Cable
Bracket, Mounting
Screws and Nuts
Wheelchair Frame
Charger Cable
Pronto® M91™ and M94™
WARNING
Controller Battery Cable
FIGURE 13.1 MKIV Wire Routing
98
RIGHT Motor
Lead
Tie-Wraps
Walking Beam
Joystick Cable
Wheelchair Frame
NOTE: Batteries not shown
Part No. 1125038