How To Schedule Firewall Services - NETGEAR DG834 Reference Manual

Reference Manual for the ADSL Firewall Router DG834
2. Select the Schedule link of the Security menu to display menu shown below.
Figure 4-11
3. Select your Time Zone. This setting will be used for the blocking schedule according to your
local time zone and for time-stamping log entries.
Select the Adjust for daylight savings time check box if your time zone is currently in daylight
savings time.
Note: If your region uses Daylight Savings Time, you must manually select Adjust
for Daylight Savings Time on the first day of Daylight Savings Time, and clear
it at the end. Enabling Daylight Savings Time will cause one hour to be added
to the standard time.
4. The router has a list of NETGEAR NTP servers. If you would prefer to use a particular NTP
server as the primary server, enter its IP address under Use this NTP Server.
5. Click Apply to save your settings.

How to Schedule Firewall Services

If you enabled services blocking in the Block Services menu or Port forwarding in the Ports menu,
you can set up a schedule for when blocking occurs or when access is not restricted.
4-14
v2.0, September 2005
Protecting Your Network