NETGEAR DG834 Reference Manual page 178

Reference Manual for the ADSL Firewall Router DG834
Table B-1. Configuration summary (telecommuter example)
VPN Consortium Scenario:
Type of VPN:
Security Scheme:
Date Tested:
Model/Firmware Tested:
Gateway
Client
IP Addressing:
Gateway
Client
192.168.0.1/24
Telecommuter Example
LAN IP
192.168.0.1
Router
(at employer's
main office)
Figure B-12: Addressing and subnet used for telecommuter example
Setting Up the Client-to-Gateway VPN Configuration
(Telecommuter Example)
Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN Client and a
network gateway involves the following two steps:
• Step 1: Configuring the Client-to-Gateway VPN Tunnel on the VPN Router at the Employer's
Main Office.
• Step 2: Configuring the NETGEAR ProSafe VPN Client on the Remote PC at the
Telecommuter's Home Office
-14
Scenario 1
PC/client-to-gateway, with client behind NAT router
IKE with Preshared Secret/Key (not Certificate-based)
May 2005
DG834G firmware version v2.10.20
NETGEAR ProSafe VPN Client v10.5.1 (build 8)
Fully Qualified Domain Name (FQDN)
Dynamic
Gateway A
WAN IP
FQDN
ntgr.dyndns.org
"fromDG834G.com"
configures the NETGEAR ProSafe VPN Client endpoint.
202-10005-05, June 2005
NAT Router B
WAN IP
0.0.0.0
"toDG834G.com"
Router
(at telecommuter's
home office)
Client B
192.168.2.3
PC
(running NETGEAR
ProSafe VPN Client)