NETGEAR DG834 Reference Manual page 36

Adsl firewall router
Hide thumbs Also See for DG834:
Table of Contents

Advertisement

Reference Manual for the ADSL Firewall Router DG834
7. You should only disable NAT if you are sure you do not require it. NAT automatically assigns
private IP addresses (192.168.0.x) to LAN connected devices. When NAT is disabled, only
standard routing is performed by this router.
Classical routing lets you directly manage the IP addresses the DG834 uses. Classical routing
should be selected only by experienced users.
Note: Disabling NAT will reboot the router and reset all the DG834 configuration
settings to the factory default. Disable NAT only if you plan to install the
DG834 in a setting where you will be manually administering the IP address
space on the LAN side of the router.
Internet Connection Requires Login and Uses PPPoA
1. If your Internet connection does require login, select Yes and fill in the settings according to
the instructions below.
Note: You will no longer need to launch the ISP's login program on your computer in
order to access the Internet. When you start an Internet application, your router
automatically logs you in.
2. Choose PPPoA for the encapsulation method.
3. Enter the login name (frequently the email address your ISP provided), and password.
4. If you want to change the login timeout, enter a new value in minutes. This determines how
long the router keeps the Internet connection active after there is no Internet activity from the
LAN. Entering an Idle Timeout value of zero means never log out.
5. When a connection uses PPPoA, the IP address is normally assigned automatically. However,
the DG834 allows this address to be set manually.
a. Select "Get Automatically from ISP" if your ISP assigns your IP address.
b. Select "Use Static IP Address" if your ISP gives you a statically assigned address.
6. The DNS server is used to look up site addresses based on their names.
Select "Get Automatically from ISP" if your ISP uses DHCP to assign your DNS servers.
Your ISP will automatically assign this address.
3-18
v2.0, September 2005
Connecting the Router to the Internet

Advertisement

Table of Contents
loading

Table of Contents