Setup Flow For E-Mail Printing - Toshiba e-STUDIO 2500c Quick Start Manual

5 SETUP FLOW

Setup Flow for E-mail Printing

E-mail printing allows users to print a file by sending the file as an E-mail message to this equip-
ment.
This equipment allows you to print a file sent to it via E-mail. This equipment will receive the
message from the POP3 account in the E-mail server and print the file.
This equipment can print the TIFF files only.
Setup Flow
Connect this equipment
Set up the TCP/IP
Set up the E-mail Server
Set up the E-mail Setting
62 SETUP FLOW FOR PRINTING FEATURES
Connecting to Internet
Receive print file
from POP3 server
E-mail Server
Description/Reference
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
Chapter 4 "CONNECTING TO THE DEVICE"
"CONNECTING TO THE NETWORK"
Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
Chapter 4 "SETTING ITEMS (ADMIN)"
"SETTING NETWORK FUNCTIONS"
"Setting the TCP/IP Protocol"
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the TCP/IP"
Configure the POP3 account for this equipment in the incoming mail server
and DNS Server to enable to receive E-mail print file from the Internet.
Reference: Network Administration Guide
Chapter 1 "SETTING UP NETWORK SERVER"
"Setting up DNS and Mail Servers"
Specifying the POP3 Network Servers settings using TopAccess.
Reference: TopAccess Guide
Chapter 7 "TOPACCESS ADMINISTRATOR MODE"
"Setting up from TopAccess"
"Setting up Network Settings"
"Setting up the POP3 Network Service"
Internet