Rear Wheel Speed Sensor Rotor Removal And Installation - Suzuki GSX650FA Service Manual

4E-18 ABS:
Rear Wheel Speed Sensor Rotor Removal and
Installation (GSX650FAK9)
CAUTION
!
• The ABS is made up of many precision
parts; never subject it to strong impacts or
allow it to become dirty or dusty.
• Do not hit the rear wheel speed sensor
rotor when dismounting the rear wheel.
Removal
1) Remove the rear wheel assembly. Refer to ."Rear
Wheel Assembly Removal and Installation
(GSX650FAK9) in Section 2D (Page 2D-6)"
2) Remove the rear wheel speed sensor rotor (1) by
removing its bolts (2).
CAUTION
!
When replacing the tire, make sure not to
damage the sensor rotor.
2
Installation
Refer to "Wheel Speed Sensor and Sensor Rotor
Inspection in related manual".
B917H24506012
Install the rear wheel speed sensor rotor in the reverse
order of removal. Pay attention to the following points:
• Install the wheel speed sensor rotor as the letters
• Tighten the wheel speed sensor rotor bolts (1) to the
• Install the rear wheel assembly. Refer to "Rear Wheel
1
• Check the clearance between the rear wheel speed
2
I917H2450038-01
"50T" face outside.
specified torque.
Tightening torque
Wheel speed sensor rotor bolt (a): 6.5 N·m (0.65
kgf-m, 4.7 lbf-ft)
1
(a)
Assembly Removal and Installation (GSX650FAK9) in
Section 2D (Page 2D-6)".
sensor and sensor rotor using the thickness gauge.
Special tool
(A): 09900–20803 (Thickness gauge)
(B): 09900–20806 (Thickness gauge)
Wheel speed sensor – Sensor rotor clearance
0.3 – 1.5 mm (0.012 – 0.059 in)
(A), (B)
50T
1
(a)
I917H2450039-01
I717H2450011-01