Abs Information (Gsx650Fak9); Self-Diagnosis Function And Abs Indicator Light Description - Suzuki GSX650FA Service Manual

ABS
Brake
Precautions for ABS (GSX650FAK9)
Refer to "Precautions for Electrical Circuit Service in
Section 00 in related manual".

ABS Information (GSX650FAK9)

WARNING
!
• Be sure to bleed air from the brake fluid
circuit when the brake is felt spongy or
when a brake relating part is replaced.
• Never ride the motorcycle before bleeding
the air.
Self-diagnosis Function and ABS Indicator
Light Description (GSX650FAK9)
The ABS control unit performs the self-diagnosis and
can store any electronically detected malfunctions as
diagnostic trouble codes. If a malfunction has occurred,
the indicator light lights up to inform the rider of the
malfunction. The special tool, when connected to the
mode select coupler, enables the ABS indicator light to
display the diagnostic trouble codes.
ABS Indicator Light
The ABS indicator light (1) informs the rider of any ABS
malfunctions. If a malfunction occurred, the ABS
indicator light flashes, during the self-diagnosis, to
indicate the diagnostic trouble code so that the correct
part can be repaired.
• When the ignition switch is turned to ON, the ABS
indicator light lights up even if no malfunction has
occurred, to indicate that the bulb is not burnt out. It
will go off after the motorcycle is ridden at more than
10 km/h (6.2 mile/h).
• If an ABS malfunction has occurred, the ABS indicator
light keeps lighting up.
Precautions
• Be sure to route the brake hoses correctly.
B917H24500003
• The ABS does not shorten the motorcycle's braking
distance. When riding down slopes or on wet or
bumpy roads the braking distance is lengthened as
compared to a motorcycle without ABS. In addition,
braking distance increases more, when the road is
B917H24500004
slippery.
• The ABS does not control slides which may occur
when braking while turning. As with a motorcycle that
does not have ABS, it is best not apply the brakes
while turning.
• The brake levers may move by themselves when they
are applied. This is not a malfunction.
• Only use the specified tires.
General Description
B917H24501009
NOTE
When a malfunction has occurred in the ABS,
connect the special tool to the mode select
coupler to display the diagnostic trouble
code on the ABS indicator light. Refer to
"DTC (Diagnostic Trouble Code) Output
(GSX650FAK9) (Page 4E-12)".
Special tool
FI
1
(A): 09930–82710 (Mode select switch)
(A)
ABS: 4E-1
I917H2450003-01
I917H2450004-01