Abs Operation And Abs Indicator Light; Stored Dtcs (Diagnostic Trouble Codes) - Suzuki GSX650FA Service Manual

4E-2 ABS:

ABS Operation and ABS Indicator Light

The ABS indicator light (1) shows the ABS operating condition. During normal operation, the ABS indicator light lights
up when the ignition switch is turned to ON and goes off after the motorcycle is ridden at more than 10 km/h (6.2 mile/
h). If a malfunction has occurred, the ABS indicator light keeps lighting up.
The ABS indicator light goes off when the motorcycle is
ridden at more than 10 km/h.
The ABS indicator light keeps lighting up even though the
motorcycle is ridden at more than 10 km/h (6.2 mile/h).
The ABS indicator light does not light up when turning the
ignition switch ON.

Stored DTCs (Diagnostic Trouble Codes)

As for the diagnostic trouble code, the code of the first malfunction occurred during one ignition ON period will be
stored. Pay attention to the fact that even though there may occur several malfunctions in one ON-period, only one
code will be stored. Codes of malfunction that occurred in the past are all stored, but the same diagnostic trouble code
will not be redundant.
Check and see if any diagnostic trouble code remains, by actually running the machine to activate ABS and by
carrying out the self-diagnosis after deleting the diagnostic trouble code once the malfunctioned part is repaired.
The ABS is normally activated.
One or more malfunction has been found and ABS
activation been hanged up.
Check the wire harness and combination meter. Refer to
"ABS Indicator Light Inspection (GSX650FAK9) (Page 4E-
6)".
FI
1
I917H2450003-01