Wiring Harness Routing Diagram (Gsx650Fak9) - Suzuki GSX650FA Service Manual

Wiring Harness Routing Diagram (GSX650FAK9)

4
6
1. Battery
2. Clamp
: Clamp the handle switch right and left lead wire at the middle of blue
taping.
3. Clamp
4. Clamp
: Clamp tip backward.
5. Clamp
: Cut the tip of clamp after clamping.
6. Wiring harness
: Be careful not to pinch the wiring harness with the frame and fender.
7. Brake hose (ABS)
8. Rear wheel speed sensor coupler
9. Clamp
: Clamp the wiring harness and brake hose (ABS).
1
" a"
7
8
"E"
"C"
"A"
3
"B"
9
11
10. Clamp
: Clamp the handle switch lead wires, ignition switch lead wire and
front wheel speed sensor lead wire (ABS).
11. Front wheel speed sensor coupler
: Set the coupler vertically.
12. EVAP purge control valve (E-33 only)
"A": Pass the horn and fan lead wire upper the brake hose (ABS).
"B": Pass the lead wire under the water hoses.
"C": Slack the lead wire downward.
"D": Do not make slacked lead wire.
"E": : Pass the speed meter lead wire right side of ignition switch.
"a": 5 – 10 mm (0.2 – 0.4 in)
Wiring Systems:
B917H29102008
12
5
"D"
5
2
10
I917H2910901-07
9A-5