Adjusting Picture Pos./Size - JVC GD V500PZU Instructions Manual

Picture
Mode
4
NORMAL
NORMAL
3
4 16
ZOOM
ZOOM
3 9
4 16
FULL
FULL
3 9
4 16
JUST
JUST
3 9
4 1 6
AUTO
3 9
For an elongated image Image is expanded
AUTO
4
Changes in accordance
3 with the AUTO mode
setting (see page 31)
For a 4:3 image
Notes:
(1) Do not allow 4:3 mode to be displayed for an extended period, as this can cause a permanent after-image to remain on
the Plasma Display Panel.
(2) The S-VIDEO terminal on this set can detect specially encoded signals that are compatible with a wide screen monitor.
When a full image from the S-VIDEO terminal of specially encoded video is detected by the set, the screen size is
automatically set to FULL mode.
ASPECT Controls
Explanation
NORMAL will display a 4:3 picture at its standard 4:3
size.
ZOOM mode magnifies the central section of the picture.
FULL will display the picture at its maximum size but
with sight elongation.
JUST mode will display a 4:3 picture at its maximum
size but with aspect correction applied to the center of
the screen so that elongation is only apparent at the
left and right edges of the screen. The size of the picture
will depend on the original signal.
The display will automatically become enlarged
(depending on the picture source), allowing you to view
the picture at its maximum size.
Note:
AUTO mode is designed to automatically adjust the
aspect ratio to handle a mix of 16:9 and 4:3 program
material. Certain 4:3 program material, such as stock
market data screens, may occasionally cause the image
size to change unexpectedly. When viewing such
programs, it is recommended that the ASPECT be set
to NORMAL.
23

Adjusting PICTURE POS./SIZE

Adjusting screen
1
ASPECT
Press to select the screen mode to
adjust (see page 23).
2
PICTURE
POS. /SIZE
Press to display the PICTURE POS./
SIZE menu.
Press to select H-POS/H-SIZE/V-POS/
V-SIZE/CLOCK PHASE.
During "VIDEO" and During "RGB" and "PC"
"COMPONENT" input signal modes. input signal modes.
PICTURE POS./SIZE
PICTURE POS./SIZE
NORMALIZE NORMAL NORMALIZE
NORMAL
H-POS H-POS
H-SIZE H-SIZE
V-POS
V-POS
V-SIZE V-SIZE
CLOCK PHASE
NORMALIZE
ADJUST RETURN
NORMALIZE
SELECT
ADJUST RETURN
SELECT
3
Press to adjust screen/position
(see page 25).
R
Press to exit adjust mode.
Notes:
(1) Adjustment details are memorized separately for different input signal formats (Adjustments for component signals
are memorized for 525i (480i), 625i (575i), 525p (480p), 1125i (1080i) and 750p (720p) each, and RGB/PC signals
are memorized for each frequency.)
(2) If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This
picture position movement cannot be controlled by the PICTURE POS./SIZE function.
24
INPUT
SURROUND
VOL
N R
PICTURE SOUND SET UP
PICTURE
POS. /SIZE ASPECT
PC OFF TIMER
PLASMA DISPLAY