Sony DSC-H50 Service Manual page 137

[Adjusting method]
1) If the [Start] button of the CAMERA Adjustment 3 is clicked,
the following message is displayed.
If "Wide Limit Adjustment" is necessary, click the [Cancel]
button to interrupt the Adjustment Program, and perform "2-
3. Wide Limit Adjustment".
2) If the [OK] button is clicked, the Automatic Adjustment Pro-
gram executes "1. Data Setting during Camera Adj.".
3) Upon successful completion of the "1. Data Setting during
Camera Adj.", the following message is displayed. Set the sub-
ject by referring to "Preparation of Flange Back Adj.".
4) If the [OK] button is clicked, "2. Flange Back Adj." and "3.
Release of Data Setting during Camera Adj." will be executed.
5) Upon successful completion of all items of the CAMERA
Adjustment 3, the following message is displayed. Click the
[OK] button.
DSC-H50_ADJ
4. CAMERA Adjustment 4
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Check
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 4.
2) The Automatic Adjustment Program executes "1. Data Setting
during Camera Adj.".
3) Upon successful completion of the "1. Data Setting during
Camera Adj.", the following message is displayed. Set the sub-
ject in accordance with the message.
4) Click the [OK] button is clicked, "2. Flange Back Check" is
executed. The following messages are displayed, and then op-
erate the camera to make a check in accordance with the mes-
sages.
5) Upon completion of "2. Flange Back Check", "3. Release of
Data Setting during Camera Adj." is executed.
6) Upon successful completion of all items of the CAMERA
Adjustment 4, the following message is displayed. Click the
[OK] button.
6-20