Sony DSC-H50 Service Manual page 134

1-6-3. Adjusting Method
1. CAMERA Adjustment 1
Note: There is no magnetic substance within around 8 cm of the
camera.
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Hall Adj.
3. Auto Orientation Adj.
4. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes the "1. Data Set-
ting during Camera Adj.".
3) Upon successful completion of "1. Data Setting during Cam-
era Adj.", the following message and screen are displayed. Set
the camera in accordance with the message.
4) If the [OK] button is clicked, "2. Hall Adj." will be executed.
5) Upon successful completion of "2. Hall Adj.", the following
message and screen are displayed. Set the camera in accor-
dance with the message.
DSC-H50_ADJ
6) If the [OK] button is clicked, "3. Auto Orientation Adj." and
"4. Release of Data Setting during Camera Adj." will be ex-
ecuted.
7) Upon successful completion of all items of the CAMERA
Adjustment 1, the following message is displayed. Click the
[OK] button.
Processing after Completing Adjustment:
[Checking method]
1) [HOME screen] t [Settings] t [Shooting Settings] t
[Shooting Settings 2] t Select [Auto Orientation] to "ON".
2) Shoot with the set in respective positions (a) to (c) shown be-
low.
3) Check the pictures in the Playback mode to confirm that the
pictures are rotated correctly.
6-17
(a)
(b)
(c)
Fig. 6-1-16