Sp2-Xxx (Ram) - Ricoh B121 Service Manual

SP1-XXX (BIT SW) ! Section 3.2 Bit Switches
1
Mode No.
101 System Switch
001 – 032
102 Ifax Switch
001 – 016
103 Printer Switch
001 – 016
104 Communication Switch
001 – 032
105 G3-1 Switch
001 – 016

SP2-XXX (RAM)

2
Mode No.
101 RAM Read/Write
001
102 Memory Dump
001 G3-1 Memory Dump
103 G3-1 NCU Parameters
001 – 023 CC, 01 – 22
SM
00 – 1F Change the bit switches for system settings
for the fax option
! Section 3.2 Bit Switches
00 – 0F Change the bit switches for IFAX settings
! Section 3.2 Bit Switches
00 – 0F Change the bit switches for printer settings
for the fax option
! Section 3.2 Bit Switches
00 – 1F Change the bit switches for communication
settings for the fax option
! Section 3.2 Bit Switches
00 – 0F Change the bit switches for the protocol
settings of the standard G3 board !
Section 3.2 Bit Switches
Change RAM data for the fax board directly.
! Section 3.5 Service RAM Addresses
Print out RAM data for the fax board. !
Section 3.5 Service RAM Addresses
NCU parameter settings for the standard
G3 board. ! Section 3.3 NCU Parameters
15
SERVICE PROGRAM MODE
Function
Function
B620