Table of Contents
Advertisement
5857 17
Make SD Debug File
Makes a 4-MB file on the SD to save logs. The file stores the contents of key
number 2225 of SCS (for example, the information of NV usage in SCS). A file is
made in the SD when the first log is saved in the SD even if you do not execute this
SP. This processing, however, takes a long time; the user may turn the main switch
off and on before completion (the user see no message that indicates the
completion of the logging when logs are made on the occurrence of an event). The
logging takes a shorter time if you have made a log file beforehand. If you try to
make a log file on the SD where another log file has been already made, the
contents of key number 2225 is added to the log file in the SD card. In a case like
this, a new log file is not made. To make a new log file to supersede an old log file,
you must execute SP5-857-012 before executing this SP.
5858*
Debug Save When
These SPs select the content of the debugging information to be saved to the
destination selected by SP5857 002. SP5858 3 stores one SC specified by number.
Refer to Section 4 for a list of SC error codes.
5858 1*
Engine SC Error
5858 2*
Controller SC Error
5858 3*
Any SC Error
5858 4*
Jam
5859*
Debug Log Save Function
5859 1*
Key 1
5859 2*
Key 2
5859 3*
Key 3
5859 4*
Key 4
5859 5*
Key 5
5859 6*
Key 6
5859 7*
Key 7
5859 8*
Key 8
5859 9*
Key 9
5859 10*
Key 10
5860*
SMTP/POP3/IMAP4
5860 20*
Partial Mail Receive Timeout
Sets the amount of time to wait before saving a mail that breaks up during
reception. The received mail is discarded if the remaining portion of the mail is not
received during this prescribed time.
5860 21*
MDN Response RFC2298 Compliance
Determines whether RFC2298 compliance is switched on for MDN reply mail.
5860 22*
SMTP Auth. From Field Replacement
Determines whether the FROM item of the mail header is switched to the validated
account after the SMTP server is validated.
5869
RAM Disk
5869 1
Enables or disables the use of the RAM disk.
SM
SERVICE PROGRAM MODE
Stores SC codes generated by copier engine errors.
Stores SC codes generated by GW controller errors.
[0~65535 / 0 / 1]
Stores jam errors.
[-9999999~9999999 / 0 / 1]
These SPs allow you to set up to 10 keys for log files for
functions that use common memory on the controller
board.
[1~168 / 72 / 1]
[0 = No / 1 = Yes]
[0 = No / 1 = Yes]
5-51
B121/B122/B123
Advertisement
Chapters
Table of Contents
Troubleshooting
