System Connection Example - JVC VR-N900U Instructions Manual

System Connection Example

Preparation
Supplied power cable
AC 120-240V 50Hz/60Hz
Computer for configuring cameras
The following operations are possible with this system.
• Surveillance (live image recording/playback) by connecting
up to 9 cameras
• Checking recorded images on the VGA monitor
• Recording/playing sound
• Alarm recording
• Remote monitoring by computer
Analog cameras Speaker (with built-in amplifier)
VIDEO IN
1–4
VIDEO IN
VGA monitor
IP cameras
AUDIO OUT
AUDIO OUT
Alarm IN/OUT
ALARM IN/OUT
1–4
REAR I/O Terminals
VGA OUT
LAN2
SERIAL
Mouse
LAN1
Switching HUB Switching HUB
SERIAL
UPS control
UPS
Note
• Connect LAN1 to the camera network.
• Connect LAN2 to the surveillance computer network.
• For details of the protocol and port number for the network
cameras on the LAN1 network, refer to the network
camera's user manual.
• The protocol and port number used on the LAN2 network
are shown below.
Surveillance computer: HTTP 80
Email transmission:
AUDIO IN
Mic Amp
Surveillance computer
* You can connect up to 9 cameras (of
which up to 4 can be analog cameras).
* You can connect up to ten surveillance
computers.
* Reverse letters denote the terminals on
the rear panel.
120V-240V
SMTP 25
POP 110
Microphone
5