Ptz Preset Positions On Events; Auto Ptz Patrolling - JVC VR-N900U Instructions Manual

5
To define another preset position, repeat steps
2 4
to .

PTZ preset positions on events

This feature lets you make the PTZ camera automatically go
to a particular preset position when a particular event occurs.
1
Display the [PTZ Preset Positions] window.
[PTZ Preset Positions for Device Name] window
2
Click the [Setup] button in the [Preset Position
on Events] section.
3
Select the required preset position in the
[Available Preset Positions] list.
4
Select the required event in the [Available
Events] list.
5
Click the [ button.
]
This will copy the selected event to the window's rightmost
list, in which events associated with the selected preset
position are listed.
To end the association between a particular preset position
and a particular event, select the required event in the
window's rightmost list, and click the [

Auto PTZ Patrolling

PTZ patrolling is the automatic movement of a PTZ camera
between several preset positions.
1
Display the [PTZ Preset Positions] window.
[PTZ Preset Positions for Device Name] window
2
Click the [Setup] button in the [Patrolling] section.
The [Setup PTZ Patrolling] window will appear.
[Setup PTZ Patrolling] window
New:
Lets you add a [New patrol scheme] listing to the [Patrol
scheme] list.
] button.
45