Adding Matrix Content; Using Static Images (Gif Files, Jpeg Files, Etc.) - JVC VR-N900U Instructions Manual

Basic Operation
3
Drop the [Carousel] icon over the required
position.
4
Select the carousel position and specify its
properties in the [Properties] section.
Begin by selecting which cameras to include in the carousel.
You are also able to select all cameras on a server at once
by selecting the check box next to the server icon.
Image Quality:
Always select [Full] for the adjustment of the image quality
and resolution of the images that are displayed.
Frame Rate:
Select between [Unlimited] (default), [Medium] (25% of
original frame rate) or [Low] (one frame per second).
Maintain Image Aspect Ratio:
If this check box is selected, the cameras' original image
aspect ratio will be maintained.
CAUTION
• The recording frame rate may decrease when the image
quality is set to [High] or [SuperHigh (for megapixel)].
• Since the [Image Quality] setting will effect on the
recording capacity, please use this function with the [Full]
image quality property.
34
Note
• The green border indicates that the position is used for a
carrousel.
• The sequence in which cameras will appear in the
carrousel is automatically determined by their names. The
cameras will appear in alphabetical order, then loop
continuously.

Adding Matrix Content

Settings for using Milestone XProtect Matrix made by Milestone
Systems. For detailed information, please refer to the Smart
Client 3.0 User's Manual (http://milestonesys.com/?cid=265).
Using Static Images (GIF files, JPEG
files, etc.)
1
Click [Image] in the [System Overview] section.
[Image]
2
Drag and drop the [Image] icon to the required
position.
[Open] window
3
Select the required image file.
CAUTION
• When connected to a surveillance computer, the fixed
images that were set with a different computer will not be
displayed.
• Static images cannot be added to the VR-N900U.
[Screen Setup] window