Customizing Joystick Setup - JVC VR-N900U Instructions Manual

Customizing Joystick Setup

1
Click the [ ] button on the right side of the
K
window's tool bar.
2
From the menu that appears, select [Joystick
Setup].
3
Select the required joystick in the [Selected
Joystick] list.
4
In the [Axis Setup] section, specify settings for
the available axes.
Z-axis
X-axis
Y-axis
Joystick
[K] button
[Selected Joystick] list
[Axis Setup] section
[Button Setup]
section
Invert:
By default, a PTZ camera will move to the right when you
move the joystick to the right along the X-axis, move up
when you move the joystick towards you along the Y-axis,
etc. By selecting [Invert], you are able to change this to
the opposite.
Absolute:
By selecting [Absolute], The angle of the joystick
corresponds to the direction of the camera.
Action:
Lets you select the required action for an axis.
Camera Pan:
Moves the camera horizontally
Camera Tilt:
Moves the camera vertically
Camera Zoom:
Zooms in and zooms out
No Action:
No action is taken
Preview:
You can check how each camera moves on each axis with
the joystick.
5
In the [Button Setup] section, specify an action
for each required joystick button.
Select the required action in the [Action] column.
● Disabling the Joystick
To disable the use of joysticks, select the [Disable all
joysticks] check box.
37