Table of Contents
Advertisement
2 CONTROLS, CONNECTIONS AND DISPLAY
2-1 Front panel
1
* Behind
20
the cover
1
[LITHIUM BATTERY] battery box for memory backup
Install a memory backup battery. When replacing the battery with
a new one, be sure to set the date/time again.
Reference:
"4-1 Installing a battery" on page 12.
2
[POWER] indicator
3
When the [POWER] switch is turned ON, this indicator lights.
[DISPLAY PANEL]
Shows the operation status or setting details.
Reference: "2-3 Display" on page 8.
4
[TIMER] button
After programming the timer, press this button to engage the
Standby mode.
Reference: "6-2 Program timer recording" on page 23.
5
[CANCEL] button
• When a line is selected on the [PROGRAM TIMER] or
[HOLIDAY SET] screen, press this button to clear it.
• When an alarm or warning occurs, press this button to stop the
buzzer.
Reference: "6-2 Program timer recording" on page 26 and "6-4
Alarm recording" on page 28
6
[MENU] button
Press this button in the Stop mode to display the main menu
setting screen.
* The menu cannot be displayed when the
(see page 8) is on or during recording/playback.
7
[SEARCH] button
Press to display the search menu for alarm search or time/date
search. Pressing this button again restores the normal screen.
Reference: "7-4 Alarm or day/time direct search" on page 35.
8
[DISPLAY] display panel switching button
Each time this button is pressed, the display changes in order from
CLOCK to DATE to REMAIN to REC QUALITY-REC SPEED.
• Press [DISPLAY] button in any mode except Record for about 2
seconds. The recording setting display is displayed, allowing
9
you to set recording quality/number of frames.
Jog dial
In the Play or Still mode, use this dial for frame-by-frame
playback.
Reference: "7-2 Jog/shuttle playback" on page 32.
With the menu/search screen, use this dial to set the item or
value.
Reference: "Jog/shuttle dial operation" on page 16.
0
Shuttle search dial
Turn to vary the playback speed in the Play or Still mode.
Reference: "7-2 Jog/shuttle playback" on page 32.
With the menu/search screen, use this dial to set the item or
value.
Reference: "Jog/shuttle dial operation" on page 16.
!
[REC] indicator
Lights when recording on the hard disk.
Blinks during alarm/sensor recording.
Goes out during recording if you set <REC TALLY> of <FRONT
DISPLAY> to "OFF".
Reference: "5-3 Menu switch details" on page 19.
6
2
3
POWER
WARNING
SLEEP
19
6
[TIMER] indicator
4
5
6
7 8
TIMER
CANCEL
MENU
REV
DISPLAY
SEARCH
REC
STOP
PLAY
STILL
18
17
16
15
@
[CLOCK RESET/CLEAR] button
In the Stop mode, press this button together with the [STOP]
button to reset the second value on the internal clock.
• With 29 seconds or less, the minute value stays the same and
the second value is reset to 00.
• With 30 seconds or more, the minute value is increased by 1
and the second value is reset to 00.
Pressing this button stops recording during alarm/sensor
recording.
When the alarm list screen or power-off list screen is displayed,
pressing this button clears the list.
Reference: "7-4 Alarm or day/time direct search" on page 35.
Use this button to cancel the [AUTO SCAN DISK] function.
Reference: "8-1 Hard disk maintenance" on page 36.
#
[OPE.LOCK] operation lock key
Set to "ON" position with the provided key to lock switch
operation.
Security levels can be selected with menu switch <OPERATION
LOCK MODE>.
● ALL: Locks all switches.
● REC STOP: Prevents recording from being stopped when the
&
[STOP] button is pressed.
* Set to "ALL" for timer recording.
Reference: "5-3 Menu switch details" on page 19.
$
[SKIP/ALARM SEARCH·EXECUTE] SKIP SEARCH·EXECUTE
button
Skip search
In the Stop mode, press this button to go to the start or end of a
recording of the hard disk.
In the Play mode, press this button to start skip search.
There are three types of skip search:
● Time search: Goes to the point a specified time from the
current point.
● Event search: Goes to the start of an event recording.
● Alarm search: Goes to the start of an alarm recording.
Reference: "7-3 Skip search" on page 33
EXECUTE button
Use this button to execute alarm direct search, day/time direct
search or "disk scan"/ "quick format".
Reference: "7-4 Alarm or day/time direct search" on page 35 and
"8-1 Hard disk maintenance" on page 36
%
[STILL] button
In the Play mode, press this button to engage the Still mode.
^
[PLAY] button
Press this button to start playback.
● In the Stop mode: Playback starts at the position where
playback was last stopped.
* Just after the power is turned ON, playback starts from a point
about 5 seconds before the end point of the last recording.
● In the Record mode: Simultaneous Playback mode is
engaged.
Reference: "Simultaneous Playback mode" on page 31.
9
10
11
DIGITAL VIDEO RECORDER VR-510U
REC
FWD
CLOCK RESET/ CLEAR
OPE. LOCK
EXECUTE
ON
SKIP/ALARM
SEARCH
14
13
12
Advertisement
Table of Contents
