Recording; Basic Operation; Recording System; Normal Recording> <Repeat Recording - JVC VR-510U Instructions Manual

6 RECORDING

6-1 Basic operation

Operation
1. Turn the power ON.
Check the connections and set the [POWER] switch on
the rear panel to ON.
2. Set the menu switches.
Set the menu switches as required. For details, refer to
"Setting" on page 17. For major menu switches, refer to
the description shown on the right.
3. Start recording.
Press the [REC] button to start recording.
4. Stop recording.
Press the [STOP] button to stop recording.
Memo:
● Recording duration can be set with a menu switch.
For more details.
Reference: "11-1 Recording time" on page 47.
<Normal recording>
● As shown in the figure on the
right, recording is performed
consecutively until the hard disk
is full.
● Each recorded section (Rec Start
To Rec End) is called an event.
● Recording stops when the hard
disk is full. Additional recording is
not possible.
* When the hard disk is full (remain-
ing capacity is 0%), a signal is
output from the [HDD FULL]
terminal.
(When menu switch <HDD FULL
OUT> is set to "ON" and menu
switch <REPEAT REC> is not set
to "OFF")
22
POWER
WARNING
SLEEP
[REC] button

Recording system

Beginning of the hard disk
Start of
Event 1
recording
Stop
Start of
Event 2
recording
Stop
Start of
Event 3
recording
Stop
Start of
Event 4
recording
END
End of the hard disk
Jog dial
[MENU] button
DIGITAL VIDEO RECORDER VR-510U
TIMER CANCEL MENU
REV
DISPLAY SEARCH
REC STOP PLAY STILL
SKIP/ALARM
SEARCH
[STILL] button
[STOP] button
Major menu switches
[DVR MODE] menu switches
[REC QUALITY]
[REC SPEED]
[AUDIO REC]
[REPEAT REC]
[TIME DATE REC] : Sets whether or not time/date is
<Repeat recording>
● Allows recording to continue
when the hard disk is full by
overwriting the oldest previous
recordings.
● Recording continues until the
[STOP] button is pressed.
● In the Repeat Record mode,
the on-screen hard disk
remaining capacity indication is
not displayed.
● When overwriting starts from
the beginning of an event, the
entire event will be erased.
Shuttle search dial
REC
FWD
CLOCK RESET/ CLEAR
OPE. LOCK
EXECUTE
ON
: Sets the recording picture quality.
: Sets the number of fields to be
recorded per second.
: Sets whether or not audio signals are
recorded when menu switch <REC
SPEED> is set to a position other than
1/5 or 1/10.
: Sets whether or not repeat recording
is executed.
When set to "AL·STOP", "AL·LOCK"
or "ALL", the [REPEAT REC]
indication lights on the display panel.
Lights
recorded during recording.
Beginning of the hard disk
Event 4
Overwriting
Event 2
Event 3
Event 4
Event 2 is
erased.
End of the hard disk
Stop
Start of
recording
Stop
Start of
recording