JVC VR-510U Instructions Manual page 21

5 ON-SCREEN DISPLAY/MENU SWITCHES (contd.)
5-3 Menu switch details
Setting item Menu switch
ALARM/ REC MODE
SENSOR MODE
REC DURATION
PRESENSOR REC
PRESENSOR REC
DURATION
BUZZER HDD END
ALARM/SENSOR
WARNING
UTILITY AUTO SCANDISK
MANUAL SCAN
DISK
QUICK ERASE
(contd.)
Setting value
[OFF] Sets the alarm or sensor recording.
ALARM OFF
SENSOR ALARM
SENSOR : Executes sensor recording.
Reference: "6-4 Alarm recording" on page 28 and "6-5 Sensor
10 SEC Selects the recording duration when an alarm or sensor signal
15 SEC is input.
30 SEC 10 SEC : Executes alarm/sensor recording for 10 sec.
60 SEC 15 SEC : Executes alarm/sensor recording for 15 sec.
120 SEC 30 SEC : Executes alarm/sensor recording for 30 sec.
[180 SEC] 60 SEC : Executes alarm/sensor recording for 60 sec.
MANUAL 120 SEC : Executes alarm/sensor recording for 120 sec.
180 SEC : Executes alarm/sensor recording for 180 sec.
MANUAL: Executes alarm recording for as long as an alarm
*Recording continues about 5 seconds after the set duration
has passed.
(<AL/SENS DET MARK> is also shown.)
[OFF] Sets whether or not pre-sensor recording is executed.
ON To execute pre-sensor recording, set this switch to "ON".
Reference: "Pre-sensor recording" on page 29.
[10 SEC] Selects the recording duration when menu switch
30 SEC <PRESENSOR REC> is set to "ON".
60 SEC Reference: "Pre-sensor recording" on page 29.
[OFF] Sets whether or not the buzzer sounds when the hard disk is
ON full (during recording).
OFF: The HDD end buzzer does not sound.
ON : The buzzer sounds.
[OFF] Sets whether or not the buzzer sounds during alarm/sensor
ON recording.
OFF: The buzzer does not sound.
ON : The buzzer sounds.
[OFF] Sets whether or not the buzzer sounds when a warning occurs.
ON OFF: The buzzer does not sound.
ON : The buzzer sounds.
[OFF] Sets whether or not the disk is scanned when the power is
ON turned ON.
OFF: Disk is not scanned.
*The disk is not scanned unless the Record mode is engaged
before the power is turned OFF.
ON : Scans the disk when the power is turned ON.
Reference: "8-1 Hard disk maintenance" on page 36.
[OFF] When this switch is set to "ON" and the [SKIP
ON SEARCH·EXECUTE] button is pressed, the disk is scanned.
Reference: "8-1 Hard disk maintenance" on page 36.
[OFF] Selects whether the hard disk is formatted with standard or
STD extended mode.
EXTN When the disk is formatted, all existing data on the hard disk
will be erased.
OFF
STD
EXTN : Set to this position if you want to be able to record
* Extended formatting takes about 5 minutes to complete.
Recording time is shorter than with the standard format.
Reference: "8-1 Hard disk maintenance" on page 37.
Description
: Does not execute alarm/sensor recording.
: Executes alarm recording.
recording" on page 29.
signal is input.
: Does not format.
: Normally, use this position. Up to 13,000 alarm/
sensor events can be recorded.
more than 13,000 alarm/sensor events (up to about
100,000 events).
21