Introduction; The Front Panel And Keys - Simrad AP70 Operation Manual

Introduction

1

The front panel and keys

 *
No.
Introduction |
5
STBY AUTO NAV WORK
8 9 10 11
Available on AP80 control units only.
Key/Description
1 CMD/THRUSTER. A short press takes/requests command. A long press (3
seconds) activates/deactivates available thrusters
2 MENU. A short press displays the active steering mode's quick menu. A second
click displays the Settings menu
3 POWER/LIGHT. A short press displays the Light dialog. A long press (3 seconds)
turns the unit ON/OFF
4 ROTARY KNOB (Course wheel). Rotated for selecting menu item and adjusting
value, pressed to confi rm a selection/entry.
For mode specifi c operation, refer to "The operational modes" on page 17
5 PORT (Cancel). Exits menu/returns to previous menu level.
Activates NFU steering when in Standby mode.
Changes set heading, set course and track off set to port.
6 STBD (Confi rm). Confi rms menu selection/enters next menu level.
Activates NFU when in Standby mode.
Changes set heading, set course and track off set to starboard.
7 TURN. Displays the Turn dialog
8 STBY. Turns the autopilot to Standby mode
9 AUTO. Activates Auto and NoDrift mode
10 NAV (AP70) / TRACK
11 WORK. Used for selecting work profi le
12 USB port door
13 ALARM. Displays the Alarm listing dialog
14 USB connector
AP70/AP80 Operator Manual
1 2 3
CMD MENU
4
6
TURN
7
12* 13*
(AP80). Activates Nav steering mode
14* 12*
AP80 control units only
| 5