Timer Recording; Showv View Timer Programming - JVC 0503-AH-ID-JVE Instructions Manual

46
EN
S V
HOW IEW
Programming
You can programme this recorder to timer-record as many as 16
programmes.
With the S V system, timer programming is greatly
HOW IEW
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
Before performing the S
Programming:
Make sure that the recorder's built-in clock is set properly.
Turn on the TV and select the AV mode.
Slide TV/CABLE/SAT switch to the right.
A
Turn on the recorder.
1
Press .
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
Timer
®
V Timer
HOW IEW
?
C
Access the S
HOW
A Press PROG.
B Press
w e
to move the arrow to "SHOWVIEW", then
press OK.
When "PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME" appears on the TV screen, you need to cancel
some of the currently set programmes. (
D
Enter the S
HOW
Press the number keys to enter the S
a programme you wish to record.
OR
A Press
w r e t
to move the arrow to the desired
number key, then press OK.
B Repeat step A to enter all needed numbers.
If you make a mistake and needed to delete the last entered
w r e t
number, press
press OK.
To delete all entered numbers at the same time, press
t
to move the arrow to "DELETE ALL", then press OK.
E
Select the recording deck, then confirm the
S V number.
HOW IEW
A Press
w r e t
to move the arrow to "RECORD TO",
then press OK.
B Press
r t
to select "HDD" or "VHS", then press OK.
C Press
t
to select "CONFIRM", then press OK.
If the number you entered is invalid, "SHOWVIEW NO.
ERROR CONFIRM SHOWVIEW NO. THEN RETRY" appears
on the TV screen. Input a valid S
If "SET GUIDE PROG THEN RETRY" appears on the TV
screen, set Guide Program Numbers (
F
Check the programme data.
The S V number you
HOW IEW
entered and the matching
timer-recording information
are displayed on the TV
screen. Check they are
correct.
To cancel this setting, press
PROG.
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see "S
HOW
and set the Guide Program number correctly.
G
Set the recording speed.
A Press
r t
to move the arrow to "REC MODE", then
press OK.
B Press
r t
to select the desire mode, then press OK.

TIMER RECORDING

V screen.
IEW
pg. 50)
V number.
IEW
V number of
HOW IEW
to move the arrow to "DELETE", then
V number.
HOW IEW
pg. 85) manually.
V ® System Setup" on page 85
IEW
w r e