Index Search - JVC 0503-AH-ID-JVE Instructions Manual

40
EN
Repeat Playback
Your recorder can automatically play back the whole tape 100
times repeatedly.
1
Start playback.
Press .
4
2
Activate Repeat Playback.
Press and hold for over 5 seconds, then release.
4
The Play indicator ( ) on the front display panel blinks slowly.
4
After playing back a tape 100 times, the recorder stops
automatically.
3
Stop Repeat Playback.
Press at any time.
8
Pressing , , or
4 3 5
also stops Repeat Playback.
9
RECORDING/PLAYBACK ON VHS DECK (cont.)

Index Search

Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Activate Index Search.
Press or (
w e 2
displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
twice.
To locate the beginning of D from the current position, press
once.
When the specified index code is located, playback begins
automatically.
Next Function Memory
The Next Function Memory "tells" the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a- For Automatic Start Of Playback
Press , then press
3
b- For Automatic Cassette Ejection After Tape Rewind
Press , then press
3
or ). " 1" or "
6 2 6
or
w
Current position
Index number
within 2 seconds.
4
within 2 seconds.
1" is
repeatedly
e
w
e