Manual Dubbing (From Dvd To Vcr) - JVC DR-MV1B Instructions Manual

Dvd video recorder & video cassette recorder
Hide thumbs Also See for DR-MV1B:
Table of Contents

Advertisement

Filename [DR-MV1SEK_09Editing.fm]
DR-MV1SEK_00.book Page 70 Thursday, April 15, 2004 3:30 PM
EDITING
70
EN

Manual Dubbing (From DVD To VCR)

Dubbing A Part Of A Disc
You can dub the selected scenes on a tape to the DVD disc,
starting and stopping wherever you wish.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
VCR/DVD
VCR/DVD
1
4
7
3
8
REC MODE
Page 70
} DVD
9 5
4
DUB
8
73
SAT
2
3
5
6
8
9
0
PROGRESSIVE SCAN
4
5
9
7
1
For DVD deck
Load a disc you want to dub.
For VCR deck
Load a cassette with the record safety tab intact.
2
Press }DVD to select the dubbing direction.
"}DVD" lights up on the front display panel.
3
Prepare the DVD deck for dubbing.
A Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
B Locate the point from where you want to start dubbing, then
pause playback by pressing the following buttons: 4, 5, 3,
8, 9
4
Prepare the VCR deck for dubbing.
A Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
B Press REC MODE repeatedly to set the recording mode.
C Press and hold 9, then press 7 so that the VCR deck enters
the Record Pause mode.
5
Press and hold DUB for more than 2 seconds to start the
dubbing.
6
Press 8 to stop recording on the VCR deck. Then press VCR/
DVD, and press 8 to stop playback on the DVD deck.
NOTES:
It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually stars.
The superimposed indication during the operation or dubbing is not
recorded.
When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
When the progressive mode is set, "}DVD" does not light up on the
front display panel. Press PROGRESSIVE SCAN so that video
output indicator (
) lights off on the front display panel.
It is not possible to perform other operations like Live Memory
Playback. Check the recorded programme on the disc after dubbing.
Masterpage:Left+
April 15, 2004 3:18 pm

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr-mv1s

Table of Contents