JVC DR-MV1B Instructions Manual page 14

Filename [DR-MV1SEK_04Name.fm]
DR-MV1SEK_00.book Page 14 Thursday, April 15, 2004 3:30 PM
INDEX
14
EN
Front Display Panel
A
K L
A VPS/PDC Indicator*
pg. 46 – 47
Appears when checking if the station being received transmits a
VPS/PDC signal.
* VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this unit.
Disc Type Indicator
When a disc is loaded, the type of the disc is indicated.
Disc Status Indicator
When a disc is running, the disc marks rotate.
During High-Speed Search:
During Slow Motion:
While recording:
While paused:
While stopped:
While resume stopped:
While the disc tray opened:
No disc on the disc tray:
B VR Mode Indicator
pg. 87
Lights when a DVD-RW disc is formatted in VR mode.
C
Indicator pg. 47
Lights when a disc set up for On-Disc Timer Programming is loaded.
D Recording Mode Indicator (XP/SP/LP/EP/FR)
Blinks when recording mode is being set.
While "FR" is blinking, the left 3 digits of the Multi Display (N O)
indicate setting values ranging from "60" to "480". After the value
has been set, only "FR" lights.
E Group/Title Indicator (GRP/TITLE)
"GRP" or "TITLE" lights depending on a disc loaded while the left 2
digits of the Multi Display (N) indicate the numbers explained below.
"GRP": Total number of groups or group number being played
back are displayed on the Multi Display.
"TITLE": Total number of titles or title number being played back
are displayed on the Multi Display.
F Track/Chapter Indicator (TRK/CHAP)
"TRK" or "CHAP" lights depending on a disc loaded while the 3rd
and 4th digits from the left of the Multi Display (O) indicate the
numbers explained below.
"TRK": Total number of tracks or track number being played
back are displayed on the Multi Display.
"CHAP": Chapter number being played back are displayed on the
Multi Display.
G Simulated Surround Effect Indicator (3D)
Lights when a simulated surround effect is set to "3D-ON" on the on-
screen bar.
Page 14
B C D E
M N
Rotate faster than normal playback.
Rotate slower than normal playback.
Inner red ring lights in the same way
as normal playback. During Instant
Timer Recording (ITR), inner red ring
slowly blinks.
Disc marks blink when either
recording or playing back.
Disc marks all light.
Disc marks all blink.
Disc marks all light out.
Disc marks all light out.
pg. 42
pg. 38
F G H I
O P Q
H Linear PCM Indicator (LPCM)
Lights when "XP MODE REC AUDIO" is set to "LINEAR PCM"
( pg. 81) for recording with DVD-RAM, DVD-R and DVD-RW
discs, and when Linear PCM audio is played.
I Random/Programme Playback Mode Indicator (RND/
PRGM) pg. 40
"RND": Lights when Random Playback mode is set.
"PRGM": Lights when Programme Playback mode is set.
J Repeat Mode Indicator (
Select Repeat Playback mode on the on-screen bar.
" ": Whole disc is played back repeatedly.
It also lights up during the Repeat Playback on the
VCR deck.
" 1": A single title/chapter/track is played back repeatedly.
" A–B": The selected part (A–B) is played back repeatedly.
No display: Repeat Playback mode is off.
K Automatic Satellite Programme Recording Indicator
(SAT#) pg. 50
Lights up when the DVD deck is in the Automatic Satellite
Programme Recording standby mode while the VCR deck is used.
L VCR Indicator
pg. 43, 54
Lights up when the mode is switched to the VCR mode using the
TV/VCR button. When switching the mode, "VCR" or "TV" appears
for about 2 seconds on the Multi Display (R).
M Video Output Indicator ( )
No display:Indicates that interlace mode is engaged.
: Indicates that progressive mode is engaged.
(Example) lights when video output mode is in progressive
mode.
N Group/Title Number Display
O Track/Chapter Number Display
P Remaining Time/Elapsed Time Indicator
Lights when remaining time of DVD-RAM, DVD-R and DVD-RW
discs is displayed, and lights out when elapsed time is displayed.
The right 6 digits of the Multi Display (R) indicate elapsed or
remaining time of each track.
No display:Indicates elapsed time of the disc.
Displayed: Indicates remaining time of the disc.
Q Remaining Time/Elapsed Time Display
R Multi Display
Displays clock, received channel, elapsed time, and remaining time.
Also displays status of the unit (NO DISC/OPEN/CLOSE/
READING).
Masterpage:Left+
J
R
/1/A–B) pg. 36, 53
pg. 89
pg. 29, 43
pg. 29, 43
April 15, 2004 3:19 pm