Lexus GS450h Dismantling Manual page 29

12. REMOVE NO. 4 HYBRID VEHICLE
BATTERY SHIELD SUB-ASSEMBLY
Caution:
Wear insulated gloves.
(1) Using the service plug grip, release the
battery cover lock striker.
(2) Remove the 4 nuts and No. 4 hybrid
vehicle battery shield sub-assembly.
13. DISCONNECT NO. 4 FLOOR WIRE
Caution:
Wear insulated gloves.
(1) Remove the battery shield contact.
(2) Remove the 2 nuts and disconnect the 2
wires of the No. 4 floor wire. (High
voltage cable)
Notice:
Insulate the terminals of the removed frame
wire with insulating tape.
14. REMOVE No. 1 HYBRID BATTERY
INTAKE DUCT LH
Remove the 2 clips and No. 1 hybrid battery
intake duct LH.
25