6. REMOVE CONNERCTOR COVER
ASSEMBLY
Remove the 2 bolts and connector cover
assembly.
Caution:
Wear insulated gloves.
Notice:
Do not touch the high voltage
connectors or terminals for
10 minutes after the service plug
grip is removed.
7. CHECK TERMINAL VOLTAGE
Check the voltage at the terminals in
inspection point in the power control unit.
Caution:
Wear insulated gloves.
To prevent serious injury or death,
do not proceed with dismantling
of the HV system until the voltage
at the terminals in the inspection
point is 0 V.
Standard voltage: 0 V
Hint:
Set the tester to the DC 750 Volts range to measure the voltage.
This inspection is performed to verify that it is safe to remove the HV battery.
20