Canon iR1600 Series Service Manual page 487

#1 SSSW-SW28: V.8/ V.34 protocol settings
Bit
Function
0 Caller V.8 protocol
1 Called party V.8 protocol
2 Caller V.8 protocol late start
3 Called party V.8 protocol late start
4 V.34 reception fallback
5 V.34 transmission fallback
6 not used
7 not used
[Bit 0]
Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is
inhibited at calling and the V.21 protocol is used.
[Bit 1]
Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is
inhibited when called and the V.21 protocol is used.
[Bit 2]
If ANSam signal is not received during transmission (mainly manual transmission), select
whether to use the V.8 protocol when the other fax machine declares the V.8 protocol in
DIS signal. If NO is selected, the CI signal is not transmitted and the V.8 protocol is not
used even if the DIS that specifies the V.8 protocol is received.
[Bit 3]
Select whether to declare the V.8 protocol in DIS signal for reception (mainly caller
manual transmission). If NO is selected, the V.8 protocol cannot be used because it is not
declared in DIS signal.
[Bit 4]
Select whether the receiver falls back during V.34 reception. If "Prohibit" is selected, the
receiver does not fall back.
[Bit 5]
Select whether the transmitter falls beck during V.34 transmission. If "Prohibit" is se-
lected, the transmitter does not fall back.
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
CHAPTER 13 TROUBLESHOOTING
1 0
No Yes
No Yes
No Yes
No Yes
Prohibited Not
prohibited
Prohibited Not
prohibited
- -
- -
Factory setting
0
0
0
0
0
0
13-109