Superior DRT6340TEN Care And Operation Instructions Manual page 12

INNOVATIVE HEARTH PRODUCTS • DIRECT-VENT GAS FIREPLACES (DRT63 / DRC63) • CARE AND OPERATION INSTRUCTIONS
Traditional Only: Log Placement
3
6
7
Log Number
1
2
3
4
5
6
7
Table 6 - Log Set
Align Two Holes At bottom Of Log (1)
Over The Pins On The Gas burner.
Figure 7 - Placing Log 1
Figure 8 - Placing Log 2
12
5
1
Description
Log, Center
Log, Rear
Log, Center/Left
Log, Center/Right
Log, Rear/Top
Log, Front/Left
Log, Front/Center
1
2
Align Groove At The bottom Of Log (2) Over
The Grate And Push It Towards The Rear.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
2
4
Engage Logs (3 & 4) With The Grate Pins And Align Groves At
The bottom Of The Logs Over The Grate.
Figure 9 - Placing Logs 3 and 4
6
Engage Log (6) With The Grate Pin
And Align Groove At The bottom Of
The Log Over The Grate.
Figure 10 - Placing Logs 5, 6, and 7
Contemporary Only: Glass Media Placement
1. Spread a thin layer of the media evenly on the burner and
media screen.
Figure 11 - Glass media installed
2. On the corner of the right media screen, arrange the media to allow
the pilot flame to reach the burner during lighting.
3
Align Hole At bottom Of Log (5)
5
Over The Pin On Log (2).
Engage Log (7) With
The Pin On Log (4).
4
7
2
4