Vita-Mix Blending Station MP Owner's Manual page 8

L id and Cover Assembly
NOTE: Outside the United States and Canada,
your Blending Station
container configuration.
Two-Piece Lid
48 oz. / 1.4 Ltr. Xtreme Performance (XP) Container
The two-piece lid is easy to clean and
easy to put on, take off and seal.
• To remove a fully latched lid, lift the
two tabs and pull upward and off.
• Twist the center lid plug to fasten or remove.
NOTE: Blending Station MP machines are optimized for use with the Vita-Mix
48 oz. / 1.4 Ltr. Xtreme Performance (XP) container. Use of Vita-Mix Standard
containers (48 oz. / 1.4 Ltr. or compact 32 oz. / 0.9 Ltr.) may require programming
adjustments. The 48 oz. / 1.4 Ltr. Xtreme Performance (XP) container may not work
with earlier Vita-Mix models. The 64 oz. / 2.0 Ltr. standard container will not fit in the
compact cover used on the Blending Station MP. Call Vita-Mix
Customer Service or your distributor for more information.
One-Piece Lid
48 oz. / 1.4 Ltr. Xtreme Performance (XP) Container
The one-piece lid is easy to clean and easy to put on,
take off and seal.
• There is no lid plug for this lid.
• Add ingredients through port on top.
Compact Cover
Cover Door:
1. The Cover Door can be removed by opening it until
the door is horizontal. Then, gently
spread the sides of the door over
the round hinges and remove.
2. To reinstall the Cover Door, gently
spread the sides of the door and
place the door hinge cutouts over
the round hinges.
8
® MP may come with a different
(optional)
To secure lid plug, rotate
between the notches on
Lift lid tabs
to remove lid
Figure B – Top and Side view
Figure C
it so one tab locks
top of rubber lid
Figure A
Port on
top of
One-
Piece
Lid