Vita-Mix Vita-Pro Use And Care Manual

Vita-Mix Vita-Pro Use And Care Manual

High-performance commercial blenders
Hide thumbs Also See for Vita-Pro:

Advertisement

F O O D S E R V I C E
Use and Care Manual
Read And Save These Instructions
BarBoss,
®
Drink Machine,
Vita-Prep
& Vita-Pro
®
®
High-Performance Commercial Blenders
Includes: BarBoss • Drink Machine
(Two-Step Timer, Two-Speed, Variable Speed)
Vita-Prep 3 • Vita-Prep • Vita-Pro
All Models

Advertisement

Table of Contents
loading

Summary of Contents for Vita-Mix Vita-Pro

  • Page 1 F O O D S E R V I C E Use and Care Manual Read And Save These Instructions BarBoss, ® Drink Machine, Vita-Prep & Vita-Pro ® ® High-Performance Commercial Blenders Includes: BarBoss • Drink Machine (Two-Step Timer, Two-Speed, Variable Speed) Vita-Prep 3 • Vita-Prep • Vita-Pro All Models...
  • Page 2: Important Safeguards

    Vita-Mix machine. A States. rubber spatula may be used, but only when the Vita-Mix machine is not running. With the flexible rubber lid in place, the Vita-Mix accelerator tool (available with Adapters (Figure B) are available for two-prong outlets.
  • Page 3 Please be sure Variable Speed Model you are following the instructions for your blender model. (Drink Machine, Vita-Prep, Vita-Prep 3, Vita-Pro) Timer & Pulse Model ON/OFF Power Switch. Up for ON. Down for OFF.
  • Page 4 Lock Stackable Container Unlock The two-piece lid is easy to clean and easy NOTE: Vita-Mix ® lids come in several different styles. Please be sure you are following to put on, take off and seal. the instructions for your style of lid.
  • Page 5 2. Set the container on the motor base by aligning it over the centering pad anchored to Follow these instructions for the Two-Speed or Variable Speed Drink Machines, Vita-Pro the base. (Motor must be completely stopped before positioning container.) and Vita-Preps: Set the dial on HIGH (#10).
  • Page 6: Blade Assembly

    • Use caution with hot liquids. Liquids may spray from under the lid plug to loosen. Then grip blades with a cloth and remove retainer or escaping steam may cause scalding. nut by hand. • Do not process hot ingredients with the Vita-Mix non-latching lid. Replacing Blade Assembly Front Motor Base With the container upside down, grip blades with cloth, insert Power Cord.
  • Page 7 Care Note solution of warm water and nonabrasive detergent or nonabrasive liquid spray To ensure that you get the longest possible life from your Vita-Mix machine, we cleaner. NEVER IMMERSE MOTOR BASE IN WATER OR OTHER LIQUID. recommend the following products, when used as directed by the supplier: 3.
  • Page 8 ® blenders come in several similar styles. Please be sure you are NOTE: Vita-Mix blenders come in several similar styles. Please be sure you are following following the parts list for your blender model. the parts list for your blender model.
  • Page 9 If you cannot fix your machine with these suggestions, technical help is available by When applicable: calling 800-4DRINK4 (800-437-4654) or 440-235-0214. If outside the United States and Canada, contact your local Vita-Mix Distributor or telephone the Vita-Mix International Division at +1.440.782.2450 or email international vitamix.com for a distributor in your country.
  • Page 10: Limited Warranty

    2. Additional drivers and accelerator tool, unless defective, are not covered. NOTE: In the event your Vita-Mix machine needs service or repair covered by the terms of this to determine if you have a defective part, please order a replacement part through warranty, please call the Vita-Mix Corporation for shipping instructions.
  • Page 11: Accessories Available

    8615 Usher Road, Cleveland, Ohio 44138-2103 USA ©2006 Vita-Mix Corporation. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording or any information storage and retrieval system without the written permission of the Vita-Mix Corporation.

This manual is also suitable for:

BarbossVita-prepDrink machine

Table of Contents