11. Keep hands and utensils out of container while motor is running to prevent the possibility of severe personal injury and/or damage to the Vita-Mix machine. A rubber spatula may be used, but only when the Vita-Mix machine is not running. With the flexible rubber lid in place, the Vita-Mix accelerator tool (sold separately) Figure B may be used while motor is running.
Page 3
A “READY” message appears when there is power to the machine. Speed Control Display Window Start/Stop A control panel is accessible by pressing the Vita-Mix logo. OWNER CONTROLS – • to reveal the mode message. Press button Press once 1 then 6 within five seconds to continue.
Containers: 2. To reinstall the Cover Door, • Blending Station Advance machines are optimized for use with the Vita-Mix 48 oz. / 1.4 Ltr. Xtreme gently spread the sides of Performance (XP) container. Use of Vita-Mix Standard containers (48 oz. / 1.4 Ltr. or compact the door and place the door 32 oz.
Page 5
Push TEMP TOTAL.” gently until chip engages into the port. The DISPLAY WINDOW 2. Press the Vita-Mix logo two more times to reveal the instructions on resetting the PRE-SET will read “NEW MODULE.” buttons.
Page 6
Blending Station ® Advance Recipe Options Arranged by recipe number and drink type: RECIPE RECIPE DRINK TYPE DESCRIPTION DRINK TYPE DESCRIPTION NUMBER TIME NUMBER TIME Thin Juice Drink Ramps up to HIGH (87%) 1-2 Drink Cocktail Ramps up to HIGH (90%) Light Coffee Drink Ramps up to HIGH (100%) 3-4 Drink Cocktail...
See page 14 for instructions. • Refer to the Vita-Mix Blending Station In-Counter Template (provided in the machine’s original package) for detailed installation guidelines and a template. 5.67 in. / 14.4 cm...
Gasket Installation Instructions: 1. If your recipe freezes up, try reducing the amount of ice. Compared to other blenders, you do not need as much ice to make an equally frozen drink in a Blending Station ® Advance. 1. Follow the instructions on page 12 for preparing the counter area for the installation of 2.
Page 9
Blending Station Advance Instructions Using ® the PRE-SET Program Buttons 1. Place liquids and soft foods in the container first, solid items and ice last. Although not The following is the basic Advance setting of the six PRE-SET buttons for the Blending Station necessary for processing, you may want to cut or break food into smaller pieces for more Advance machines.
Page 10
Your recipes may be opening. Place retainer nut on and hand tighten. Last, carefully too thick or have too much material in them. Consider adding more liquid and consult Vita-Mix ®...
Page 11
Be careful to not scratch or scrub the display window on the control panel. NEVER To ensure that you get the longest possible life from your Vita-Mix machine, we recommend Dry with a soft cotton cloth. IMMERSE MOTOR BASE IN WATER OR OTHER LIQUID.
Page 12
IMPORTANT NOTES! • Outside the United States and Canada, your machine may come with a different container configuration. Contact your local Vita-Mix Distributor for item numbers. #18008 • Other than the drive socket, blade assembly and retainer nut, this unit is not user serviceable.
Page 13
If outside the United States and Canada, Solution #2: TERMINATED contact your local Vita-Mix Distributor or telephone the Vita-Mix International Division at Call Vita-Mix Customer Service if the +1.440.782.2450 or email international@vitamix.com for a distributor in your country. For machine does not work after sitting at room online help, visit temperature for 24 hours.
® model is included and packaged with each machine. not covered by this warranty. Warranty is void if the Vita-Mix machine is put into a sound 2. Additional drivers, unless defective, are not covered. to determine if you have a NOTE: reduction chamber or otherwise prevented from receiving proper cooling.