Vita-Mix Blending Station MP Owner's Manual page 25

7. Problem:
• Machine is running irregularly
• "NO PROGRAM" is displayed when a
button is pushed
• Button pressed starts wrong program
• Machine starts by itself
• A specific program button is defective
• Machine was turned off for a day,
week or month and turned on, but
there is no power
• Machine does not work when first tried
• Machine works but no information
displayed on screen
• Program buttons run the blender on
the same speed
8. Problem:
• Display widow reads
CORRUPT DATA
9. Problem:
• Display window reads "THERMAL
SENSOR FAILURE"
10. Problem:
• Machine stops in the middle of its
blend cycle and resets; display window
reads "VITA-MIX GENERAL
PROGRAM" then "READY"
Cooling the Motor:
If the machine has overheated:
MOTOR HAS OVERHEATED REMOVE..
HOT SHUTDOWN
READY
If you cannot fix your machine with these suggestions, technical help is available by calling
Vita-Mix Technical Support at 800-886-5235. If outside the United States and Canada,
contact your local Vita-Mix Distributor or telephone the Vita-Mix International Division at
+1.440.782.2450 or email international@vitamix.com for a distributor in your country. For
online help, visit www.vitamix.com/foodservice.
• The motor will stop and the message "MOTOR HAS
OVERHEATED REMOVE THE CONTAINER, THEN PRESS
START," will scroll across the display window, while the words
"HOT SHUTDOWN" will remain in the display window alerting you
of the problem.
• The machine will not run until the container is removed and
the motor has cooled. Remove the container, shut the cover door
and press the START/STOP button and run the machine for two
minutes.
• When the motor is cool, "READY" will appear in the display window.
Solution #1:
Reset the machine to its original factory
settings. (See page 7.)
Solution #2
Try plugging the machine into a new outlet.
Solution #3:
Call Vita-Mix Technical Support.
Solution #1:
Reset the machine to its original factory
settings. Reinstall the original programming
chip (if included).
Solution #2:
Call Vita-Mix Technical Support.
Solution #1:
Call Vita-Mix Technical Support.
Solution #1:
Plug the machine into its own power supply.
Solution #2:
Make sure the machine is not running on a
long extension cord.
25