Filename [M150SEK_09Editing.fm]
M150SEK_00.book Page 58 Wednesday, June 15, 2005 4:04 PM
EDITING
58
EN
L-2 Select Setting
Set AL-2 SELECTB to the appropriate mode depending on the type
of appliance connected to the unit's [L-2 IN] connector.
1
Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB
(A pg. 57).
2
Press selection keys to select AL-2 SELECTB, then press
ENTER.
3
Press selection keys
to select the
DVD SET UP
VIDEO IN/OUT RECORDING SET
appropriate setting,
then press ENTER.
4
Press SET UP to
complete the setting.
SET UP
* The boldface settings below indicate the settings at your purchase.
L-2 SELECT
VIDEO/RGB
^
8
SAT S-VIDEO/RGB
Select AVIDEO/RGBB or AS-VIDEO/RGBB to use this unit as the
recording deck with the player connected to the [L-2 IN] connector,
or to use the satellite receiver connected to the [L-2 IN] connector.
VIDEO/RGB
:
If a connected appliance's output is compatible only with regular
video signals, set to AVIDEO/RGBB.
S-VIDEO/RGB
:
If a connected appliance's output is compatible with Y/C
signals, set to AS-VIDEO/RGBB. You can obtain a high-quality
picture. (For connection, be sure to use a 21-pin SCART cable
that is compatible with the Y/C signal.)
Select ASAT VIDEO/RGBB or ASAT S-VIDEO/RGBB to view a
satellite programme with the TV set while the unit is turned off.
SAT VIDEO/RGB
:
If a connected satellite receiver's output is compatible with
regular video signals, set to ASAT VIDEO/RGBB.
SAT S-VIDEO/RGB
:
If a connected satellite receiver's output is compatible with Y/C
signals, set to ASAT S-VIDEO/RGBB. You can obtain a high-
quality S-VIDEO picture. (For connection, be sure to use a 21-
pin SCART cable that is compatible with the Y/C signal.)
Selection Keys
(FGDE)
ENTER
SET UP
FUNCTION SET UP
INITIAL SET UP
DISPLAY SET
OTHERS
MONITOR TYPE
16:9AUTO
F-1 INPUT
VIDEO
L-1 INPUT
VIDEO
L-1 OUTPUT
SCART VIDEO
VIDEO/RGB
L-2 SELECT
S-VIDEO
S-VIDEO/RGB
SAT VIDEO/RGB
OK
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT
S-VIDEO/RGB
SAT VIDEO/RGB
/
/
Masterpage:Left+
NOTES:
●
When RGB signals are output from the connected appliance
such as a satellite receiver, the unit will record in RGB signals.
●
If you have a satellite receiver connected to the [L-2 IN]
connector, be sure to set AL-2 SELECTB back to appropriate
mode after editing.
●
When you want to play back and record RGB picture, connect the
satellite receiver's RGB compatible output connector to the unit's
input connector.
●
If you are not connecting a satellite receiver to the [L-2 IN]
connector, leave AL-2 SELECTB set to AVIDEO/RGBB.
●
When AL-2 SELECTB is set to ASAT VIDEO/RGBB and ASAT
S-VIDEO/RGBB, ASATB appears on the TV screen or front display
panel instead of AL-2B.
●
If AL-1 OUTPUTB is set to ASCART S-VIDEOB, it is not possible to
set AL-2 SELECTB to ASAT VIDEO/RGBB.
●
If AL-1 OUTPUTB is set to ASCART RGBB, it is not possible to set
AL-2 SELECTB to ASAT S-VIDEO/RGBB.
●
If AL-1 OUTPUTB is set to ACOMPONENTB and AL-2 SELECTB to
ASAT VIDEO/RGBB or ASAT S-VIDEO/RGBB, be sure to connect
the [L-1 IN/OUT] connector with a TV.
●
If AL-2 SELECTB is set to ASAT S-VIDEO/RGBB, be sure to set
AL-1 OUTPUTB to ASCART S-VIDEOB.
F-1 Input Setting
Set AF-1 INPUTB to the appropriate mode depending on the
connector ([VIDEO] or [S-VIDEO]) being used on the front panel.
1
Perform steps 1 and 2 of AL-1 Output And L-1 Input SettingB
(A pg. 57).
2
Press selection keys to select AF-1 INPUTB, then press
ENTER.
3
Press selection keys
to select the
appropriate setting,
then press ENTER.
4
Press SET UP to
complete the setting.
* The boldface settings below indicate the settings at your purchase.
F-1 INPUT
VIDEO
/ S-VIDEO
^
8
VIDEO
:
When connecting an appliance to the [VIDEO] input connector,
/
set to AVIDEOB.
S-VIDEO:
When connecting an appliance to the [S-VIDEO] input
connector, set to AS-VIDEOB
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
VIDEO IN/OUT RECORDING SET
DISPLAY SET
OTHERS
MONITOR TYPE
16:9AUTO
F-1 INPUT
VIDEO
VIDEO
L-1 INPUT
VIDEO
S-VIDEO
L-1 OUTPUT
SCART VIDEO
L-2 SELECT
S-VIDEO/RGB
OK
SET UP
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
SELECT
EXIT
.